Corrosion Testing
Met-Heat Engineers Pvt. Ltd. has been providing specialised corrosion testing services since 1985. Our team of chemists and metallurgists, who are highly qualified, trained, and experienced, excel in conducting a wide range of corrosion tests and analysing the results. The Corrosion Testing laboratory at Met-Heat Engineers Pvt. Ltd. is recognized and accredited by NABL in accordance with ISO/IEC: 17025 for a variety of corrosion tests.
List of Equipment available at our Laboratory
- Portable Electrolytic Etching & Polishing Units
- Ovens
- Low Temperature Controlled Temper Bath
- Various Size & Type of Glass Wares
- pH Meter
- Surface Roughness Meter
- Pit Depth Measurement Gauge
- Zoom Stereomicroscope
- Digital Weighing Balance with 0.0001 grams least count
- Distilled Water Plant
- NACE Corrosion Laboratory set up
- Proving Rings (12 Nos.)
- Four Point Bend sample Loading Mechanism
- HIC Chambers
- Sulphide Stress Corrosion Cracking set ups (12 Nos.)
- Chloride Stress Corrosion Cracking set up
- High Temperature & High Pressure SSCC set up (4 Nos.)
- Salt Spray Chambers
- Correction Test as per ASTM A-923
Various Tests offered by our Corrosion Testing Department
- Intergranular Corrosion Test as per ASTM A-262 Practice A,B,C,E
- Intergranular Corrosion Test as per ISO-3651 Method A,B,C
- Hydrogen Induced Cracking Test (HIC) as per NACE TM-0284.
- Sulphide Stress Corrosion Cracking Test (SSCC) as per NACE TM-0177.
- Chloride Stress Corrosion Cracking Test (CSCC) as per ASTM G-36.
- Pitting Corrosion Test as per ASTM G-48 Method 'A'.
- Crevice Corrosion Test as per ASTM G-48 Method 'B'.
- Four Point Bend Test as per NACE TM-0177.
- Corrosion Test as per ASTM A-923.
- Salt Spray Test as per ASTM B-11 7.